Monday, November 21, 2022

Binding a Quilt Using the Backing

My last finish was Soar, and in the making of it, I had a bit of an epiphany when I realized that the backing would make the most perfect multi-colour bright binding. I had enough to actual cut binding strips, but it was late, and I was tired, so I knew enough to tell myself I'd trim the quilt and cut the binding in the morning when I'd be fresh.



Well my brain chugged along through the night and early morning like the little train that could, and I ended up having a lightbulb moment when I thought, 'why not try binding the quilt as I do some placemats, by carefully (that is key!) trimming the batting only, with scissors, and then trimming the backing beyond the edges of the quilt, folding it under twice and topstitching it down onto the front! I've never done a big quilt this way, though I've used the technique on several placemats. I couldn't for the life of me remember how to get the mitred corners, but eventually, it all came back.

So here, for future reference of placemats, minis, wallhangings, or quilts, is what I did.

1. Trim the backing to extend beyond the quilt top by about 3/4”. I like a 2 1/4" binding, and this allows for a little extra to go around the bulk of the quilt sandwich. Press the raw edge under 1/4” and then press again. Topstitch close to the fold, stopping about 4” from the corner.
Note my trusty helper, Bella, well her 'Avatar' as made for me by my friend Rose! I actually use this little tool a lot to help guide fabric under the presser foot, or demo something for the blog.

2. Fold the corner over onto the next raw edge, making a triangle shape. This will form the mitre.

3. Fold the raw edge of the next side up as shown. It will make an odd shape at the corner but it is fine. 

4. Fold again onto the quilt. A mitre will form at the corner. 



5. Continue topstitching around the edge. I like to sew in my satin label on the back of a quilt, but doing it this way means you have no back side of a binding edge. I simply tucked the label into the lower corner and it is just fine!

I do this on placemats, but it would work for runners, minis, and, as you see, it worked fine for a large quilt!


Edited: I received an email from a blog reader in Saskatchewan, Helen K, who said that she uses a nifty tool called the Quick Easy Mitred Binding tool.
Contact info is right on the tool


The tool is available from sewbiz@indy.rr.com and is in the neighbourhood of $21 she writes. It comes with excellent instructions, and in Helen's words, "is a good investment for quilting." Thanks Helen!


Linking up

14 comments:

  1. I've done this on some small projects and always get stuck at the mitered corner. Thanks for showing how you do it, Sandra!

    ReplyDelete
  2. Great idea! Did you leave your basting stitches in around the edge of your quilt? I usually baste the edges with four stitches per inch.

    ReplyDelete
  3. Ok... the little cat pokey tool toy thing... love!

    ReplyDelete
  4. I never get that mitered corner when I try to do this. Great job!

    ReplyDelete
  5. Brilliant! Thank you Sandra. I have some quilt tops in the pipeline for quilting and this will do nicely to finish a couple of them.

    ReplyDelete
  6. Thank you!! I am working on a bed runner and wasn’t looking forward to the binding and your idea and tutorial helped me want to finish it this way! Deb

    ReplyDelete
  7. I love this tutorial and the photos were so helpful! I'll try to remember this the next time I'm doing one of those baby quilts.

    ReplyDelete
  8. I have tried several times to use the backing as binding, but most times I end up mistakenly trimming the backing! groan! Your comment about trimming it carefully is so key! I never thought to trim with scissors! That will definitely help me!

    ReplyDelete
  9. Perfect timing (again :-) ) I took a quilt along to my quilting group last night to get advise on how to quilt it and someone suggested I used the backing as the binding - now I have the perfect tutorial to help me do it. Thank you.

    ReplyDelete
  10. Excellent tutorial, Sandra! Thanks sew much!

    ReplyDelete
  11. Thank you Sandra & better than my "old" method done on my first ever quilt 44 years ago. I also cut binding at 2 1/4" & think it's fine although others tell me it is wrong & should be 2 1/2". Your tutorial is great. Take care & hugs.

    ReplyDelete
  12. Hi Sandra! That is the cutest stiletto I've ever seen. Adorbs! Now, back to reading the tut. Thank you for sharing your process! Thanks for adding this to Kathleen's monthly tutorials and tips. I'm waiting for the houses - I know you're working on them! {{Hugs}} a bunch, my friend! ~smile~ Roseanne

    ReplyDelete
  13. Thank you for the great tutorial and the linkup! It is handy to know how to do this the right way, because sometimes using the back as the binding is just the right thing. The stilleto is one of my favorites when I am at the machine…a great tool.

    ReplyDelete
  14. If you have the perfect backing, using it as the binding is a great idea! Thank you for showing us how you do it :-)

    ReplyDelete